| [](https://stanslegacy.com/uploads/images/gallery/2024-03/8zEBCXuDDmHtlhzx-image-1710804322371.png) | [](https://stanslegacy.com/uploads/images/gallery/2024-03/2wTszFLYLqsvlX2S-image-1710818673862-24-31.png) |
Operationally, Water Fuel injector assembly (10) of Figure (1) as to (40) of Figure (2B) performs several functions simultaneously to produce thermal explosive energy-yield (gtnt) (16) on demand:
First water mist (47) of Figure (1-3A) is injected into fuel-mixing chamber (35) of Figure (3B) by way of water spray ports (41a xxx 41n) of Figure (3A); Secondly, **ionized air gases** (46a xxx 46n) of Figure (3A) *(laser primed ambient air gases having missing electrons)* produced by **Ambient Air Ionizer** (80) of Figure (4) as to Figure (1) and **non-combustible gases** (45) of Figure (3A) are intermixed with expelling water mist (47a xxx 47n) to form **Water-fuel mixture** (48) by way of **gas mixing disc** (34) of Figure (3B) as to (30) of Figure (2A); thirdly, the resultant moving **Water-Fuel mixture** (48) of Figure (3B) enters into **Voltage Igniter Stage** (180) of Figure (3B) and exposed to high intensity voltage fields (33 / 36) (typically 2,000 volts or above @ 10 Khz or above) opposite electrical polarity (E7 / E8) ...which, in turn, not only performs electrical polarization process (160) of Figure (25) undergoing **Dielectric Resonant** (240) of Figure (30); but, also sets up and triggers **Hydrogen Fracturing Process** (390) of Figure (41) as to Figure (6) under control state (on demand) via electrical-static spark ignition (49 / 51) of Figure (3B)....releasing thermal explosive energy (gtnt) (16) passing beyond gas exit port (32) of Figure (3B), as further illustrated in Figure (2) as to Figure (1).To ensure proper energy-flame projection and subsequent energy-flame stability, constant placement water pump (170) causes and allows **ionized ambient air gases** (46), **non-combustible gases** (45), and **water** (47) to be displaced under static pressure up to and beyond 125 psi respectively.
**Energy-Flame** density is enhanced and sustained by causing ionized gases (46a xxx 46n) of s**pray port** (42) to be deflected into **liquid spray path** (41), together **water mist** (47) and **ionized air** (46) are, now, directed toward and deflected through non-combustible gas spray path producing uniformed **water-fuel mixture** (48), as illustrated in Figure (3B). **Energy-Flame** temperature is regulated by controlling the volume flow-rate of each fluid mediums (47 / 45/ 46) in direct relationship to applied voltage intensity (33 /36), as further stated in Figure (2B) as to Figure (3B). To elevate **Energy-flame-temperature** still further, help increase **fluid-displacement** (46/47) while maintaining or reducing the volume flow rate of non-combustible gases (45) during an increase of applied voltage amplitude (Vo x Vn) of Figure (32) as to **Voltage Intensifier Circuit** (110) of Figure (7) and **Electron Extraction Circuit** (120) of Figure (8). To lower Energy-flame temperature simply increase the amount of non-combustible gas (45a xxx) or reduced the fluid flow rate (45 / 46/ 47)) uniformly while lowering pulse voltage amplitude (xxx Vo).To establish a predetermined or given Energy-flame temperature adjust fluid-medium (45 / 46 / 47)) and applied voltage amplitude (Vo xxx) independent of each other to obtain the desired results.
The resultant energy-flame pattern is further maintained by allowing the ignited,compressed, and moving gases (29) of Figure (3B) to be projected to, pass through and beyond **nozzle-port** (32) under pressure due to gas expansion caused by thermal gas ignition. **Voltage Igniter Stage** (180) of Figure (3B) as to **Voltage Intensifier Circuit** (110) Figure (7) as to **Extraction Circuit** (120) of Figure (8) performs several functions simultaneously to initiate and trigger thermal explosive energy-yield (gtnt) (16) beyond normal gas burning levels: Water droplets (28a xxx 28n) escaping from spray-mist (47) and exposed to high intensity voltage fields of opposite polarity 33/ 36) are stimulated to undergo Electrical Polarization Process (160) of Figure (25)...which not only separates and splits the unlike atoms of the water molecule but also causes the unlike atoms (hydrogen atoms 77a / 77b and oxygen atom 76) to experience electron ejection (230) of Figure (29) as to (71) of Figure (8) since voltage intensifier circuit (110) of Figure (7) inhibits and prevents electron flow to enter into gas ignition process (180), as further illustrated in Figure (6). The newly liberated water molecule atoms (oxygen 76 and hydrogen atoms 77a / 77b) immediately interact with laser primed ionized ambient air gases (7a xxx In of Figure 1-8) (see [WFC memo 420](https://stanslegacy.com/books/the-birth-of-new-technology/chapter/wfc-420-hydrogen-fracturing-process "WFC 420 - Hydrogen Fracturing Process")) to cause the resultant highly energized and mass destabilized combustible gas atoms (93a xxx 93n) of Figure (8) to perform **Hydrogen Fracturing Process** (80) of Figure (7) when electrostatic force (14/16) thermally ignites (*kinetic agitation*) destabilized water-fuel mixture (93a xxx 93n) under gas compression... preventing the formation of the water molecule during thermal gas ignition....satisfying **Energy Gas Detonation Equation**. [](https://stanslegacy.com/uploads/images/gallery/2024-03/nDzBsuqGP8VkgXQY-image-1710817020257-56-58.png) which states: That, whenever the mass-size of a combustible gas atom is decreased (Md), thermal explosive energy-yield (gtnt) is increased (Ein) during thermal gas combustion (Gas // Detonation.), as so illustrated in (100) Figure (6) as to (90) of Figure (5). [](https://stanslegacy.com/uploads/images/gallery/2024-03/JqeitiAp4qURSnQb-image-1711239500177-18-17.png) Incoming ambient air gases (5a xxx 5n) become laser primed and ionized when passing through Ambient Air Ionizer (Gas Processor) (80) of Figure (4) as to (10) of Figure (1) since **electron extraction circuit** (120) of Figure (8) not only captures and consumes ejected electrons (7a cx 7n) of Figure (6); but, also prevents electron flow into destabilizing gas process (180), as so illustrated in Figure (3B). In terms of performance reliability and safety, ionized air gases (46a xxx 46n) and liquid water (47a xxx 47n) do not become energy activated (volatile) until water-fuel mixture (48) reaches **Voltage Igniter Stage** (180). Injected non-combustible gases (45a xxx 45) retards and controls the combustion rate of the **Hydrogen Fracturing Process** (100) of Figure (6) during gas-ignition. In other or alternate applications, laser primed ionized liquid oxygen (68) of Figure (1-10) CF\* memo 420) and laser primed liquid hydrogen (69) of Figure (1-10) stored in separate fuel tanks can be used in place of fuel-mixture (48); or, liquefied ambient air gases (6) alone with source (8) can, also, be substituted as a fuel-source (48) to trigger Hydrogen Fracturing 10). Additional WFC Injector Assemblies (20) of Figure (2) are arranged in cluster array (20a xxx 20n) to increase energy-yield output (16a xxx 16n) of Figure (10 / 1 / 12). WFC injector assembly (10) of Figure (1) as to (30) of Figure (2A) is design variable to be retrofitable by replacing fossil-fuel injector ports affixed to jet engines (see Figure 11), heating systems (Figure 10), rockets engines (Figure 12), or even car spark plugs (130) of Figure (9) which simply uses **Water Fuel management** (WFMS) system **fluid-metering system** (40) to control gas ignition (16), as illustrated in (40) of Figure (2B).Sequential pulsing of **Water Fuel Injector** (20/30) of Figure (1) as to (40) of Figure (2B) is system activated by **Pulse Gate Valve** (190) of Figure (1) to further control a predetermined **energy-flame** (16).
In essence, then, the **Water Fuel Injector** system (40) simply processes and converts water into a useful hydrogen fuel on demand at the point of gas ignition...thereby, co-equally or superseding fossil-fuel safety standards... especially when ionized **ambient air gases** (46a xxx 46n) and **non-combustible gases** (45a xxx 45n) are intermixed with **water supply** (47) prior to entering. Water Fuel Injector Plug (20 / 30), as illustrated in (40) of Figure (2B) as to (10) of Figure (1).