Skip to content
Stan’s Legacy
Sign in

VIC circuit

With these chokes, this cell and this drive, where does the loop ring, what does the drive draw, and does the cell step-charge?

Loading a circuit fills the slots; change any of them afterwards and the result is your variation on it. All saved circuits.

The parts

The water capacitor, or a plain capacitor standing in for one. About this part.

What is in the cell. Sets the permittivity and, through its dissolved solids, the leak.

The choke on the positive side, through which the cell charges.

What the charging choke is wound on. Needed unless the choke is recorded with its inductance.

The choke on the return side.

What the blocking choke is wound on.

Between the drive and the chokes, if there is one. The drive amplitude is stepped up through it.

The drive

kHz

The pulse frequency the loop is driven at.

V

The peak voltage applied across the loop — after the transformer, if there is one.

%

How much of each pulse period the drive is on.

Hz

The slow gate switching the pulse train on and off.

%

How much of each gate period the pulses are let through.

Separate, or on one core with fields aiding or opposing.

How much of one choke's flux threads the other. Zero for separate cores.

Sign in to save this circuit

From the parts

Every number handed to the simulation that you did not type, and where it came from. Each derivation that ran a calculation links to that calculation's page with these numbers in, so it can be checked alone.

Before it can run

  • Choose the charging choke.
  • Choose the blocking choke.
  • R Series resistance 0.04 Ω

    Series resistance, added up: Plate - 9x Parallel (Max Capacity) 0.04 Ω. Wiring and connections are not counted.

  • C Cell capacitance 5.188 nF

    One pair of plates of Plate - 9x Parallel (Max Capacity) — 232.2576 cm² at a 3.175 mm gap — in distilled / deionised.

    Flat-plate cell capacitance and field

  • C Cell capacitance 46.69 nF

    9 such cells in parallel. The array calculation's inductance is a placeholder for its resonance figure; the capacitance does not depend on it.

    Multi-cell array — 2 notes on that page

  • ℓ Cell leak resistance 500 kΩ

    Leak resistance assumed at 500 kΩ: the water's conductivity is not known. Open the bare-numbers page to set it yourself.

  • No water chosen, so the cell is taken as full of distilled water at 20 °C. Pick a water to change that.