Resonant Cavity Holder Dimensions, STLs
These replicated cavities are the ones used on the buggy. Some machining is required for the inner electrodes, cost effectiveness may not be ideal for many experimenters. Therefore, a 3D printable and glue-together template was made to allow those with simple hand tools (grinder or Dremel cutoff wheel) to be able to cut slots into a 1/2" tube. In addition to this template, a 3d printable insert can be pressed or hammered into the inner diameter portion of the inner tube to provide analog to having a solid electrode.
Inner electrode dimensions: 4.00" length, 0.500" outside diameter, 0.400" inside diameter, 0.050" wall
Outer electrode dimensions: 2.75" length, 0.75" outside diameter, 0.680" inside diameter, 0.035" wall
The terminal holes should be drilled out to receive a 1/4-20 tap.
Inner Electrode Templates:
Part A_Resonant Cavity Holder.stl
Part B_Resonant Cavity Holder.stl
Part C_Inner Electrode Template.stl
Part D_Inner Electrode Template.stl
Cell Holders:
Part A:
Part A_Resonant Cavity Holder.stl
Part B:
Part B_Resonant Cavity Holder.stl