Skip to main content

VIC4 Cores, Bobbin STLs

BelowBobbin arehalf freepieces: STLsVIC4 thatHalf allowBobbin_.stl

bobbins
Bobbin Half Pieces:

Bobbins will need to be printed.super glued together. There is a 0.040" larger diameter on purpose to accommodate discrepancies with ferrite cores not aligning perfectly. These bobbins will except up to 3000 turns of #30 gauge wire if winding principles are adhered to,. 

image-1696466573170.png

Back to top