The Meyer estate, reel 2, transcribed

The Meyer estate, reel 2

Transcribed by the archive from the 720p master published by GlobalKast. The film. More of the room, and then the plate cell run for the camera with its meters in shot.

The slides, and the panels

[0:02] Hello everybody, DynoDon here again with our second video of the Stan Myers estate. In this video we intend to show a little more of some of the items that are here. As you can see, we have a box full of Stan's original slides. There's a few different boxes of those things, so this is only one of several. If we pay attention here, we can see the original control panel that worked the tubular array. which we see back here that most people have seen this video online so we decided to go ahead and show the plate cell set up here since everyone has seen the first one nobody has really ever seen this one operate we'll show you this and the control panel for it and we have some more items set up over here to show like the previous video on the buggy it was missing a few components the original distributor that will go with the system. This is a unfinished board that was meant to be the controls for the water injection systems.

The injectors and the gun

[1:12] Here you can see several different versions of the injectors. This style of injector here is the gas injectors that was used to flow gas through. The hydrogen gas. Over here is the actual water injectors that was used to make water at the cylinder. And here you can see the original hydrogen gas gun.

The home heating panel

[1:44] And here's a bunch of computer memories. So there's just boxes of these things, of some of the stuff. Here is the panel for the home heating unit. This is on the previous video without the covers. This is a manual for that, a master copy. And then this is another copy pertaining to just that panel, that controlled unit itself. So these are all stands, personal drawings, everything to do with this system. So then over here there's just a sample of some of the VCR tapes and some more floppies for Macintosh systems. There's boxes of these things. And back here's a couple more boxes of files and some manuals of different sorts in here. So mainly what we're looking to do here is give you guys a brief show of this cell in operation. So what we'll do first here is we'll come down here

Running the cell

[2:49] We'll turn on the master panel. Showing the power. You can see the light blinking here. That corresponds to the frequency as we adjust the light a good fashion faster. This is on the times one scale. The power is turned all the way down so we have no gas. The plates in the cell is separated to its widest point. So let me show you how the gas produces. So the first thing we'll do is we'll take and turn this thing up to about 50 volts.

[3:24] And you can see the voltmeter fluctuating with the pulses. There's barely some movement on the amp gauge. As we come up to the cell, it is just now producing a light stream of gas. Now with this here, we can adjust the cell to the top.

[3:45] to close the plates to increase the gas production even farther as the plates come together the gas rate increases not sure how clean this video is going to show up for us but let's see if we can get a little more action for you but

[4:15] You can see the gases are clouding the water up for the well, so it's producing some good gas flow.

Changing the range

[4:25] Now when we come back to the panel, we'll select a next higher range, which would be times 10. So now we're going to go from, say, 10 hertz pulses up to about 100 hertz pulses, still at 50 volts.

[4:41] Come back up here and we can see the gas flow some more. You can see the clouds coming all the way down into here as it produces. As you bring the plates closer together, current's still down under around 5 amps or so. Pulses, voltage pulses. We can adjust pulses.

[5:13] Just by varying the frequency, you can change the pulsing.

[5:20] You can see the effects on gas.

[5:24] Turn the gas plates all the way out.

[5:29] Production should slow down, as well as you can notice the ammeter drops. Volts are holding steady, about 55 volts.

[5:40] We can go to the next higher range. Again, the light you can see now is almost constant because it's flashing so fast. We can then vary the frequencies, vary the gas.

[6:00] You can see the gas just rolling off. Now this video is just meant to give you a

What it would take to tune it

[6:07] demonstration of the unit to maximize the efficiency out of this system. It would require tuning of the frequencies in different ranges, tuning of the plates, all in order to get the lowest amount of amp drops for the best amount of voltage applied. As you can see, the cell is really starting to come down now, getting cloudy over halfway down. We can't really tell much from the top. I'd like to say this is just going to be a basic thing to show you that most of the systems are still here, they are functional, they still work, so a lot of knowledge can be gained by experimenting with this stuff. trying to figure out what he's done. So if you read the descriptions that we place on with the videos, you'll get an idea of what's going on here and what we are looking to do now. So I've been working with the current owner on this stuff for over a year now and become good friends with the guy and he's allowed me to do all this.

Why they filmed it

[7:23] And basically we're just trying to find some means for attention to get funding, financing, backing, Stuff like that. The description will tell you how you can contact us. Get us right through the YouTube video. So questions can be asked there. We'll try to answer them as best as we can. Stands original cells that most everybody see all through YouTube. You've got all your multiple tubes here.

[8:04] So we haven't bothered to try and show this one because everyone knows how this one works. There's literally no videos out there now of this cell working.

[8:16] So I hope you enjoy. If this doesn't work out as good, we may do more later. But for now, this is just to try and get some notice out there to the public that the stuff's here. It's still around, so... Post your questions and we'll do the rest we can in answering them. I'll try and do another video with just showing this thing working without any talking going on. So, hope you enjoyed this. DynoDon again and see you later.