Inductance needed for a target frequency, two ways

The same calculation run twice, side by side. Change anything on either side and the difference is shown output by output. This page is a link: both sets of numbers are in the address bar.

Side A open alone

f Target frequency

kHz

Where you want the circuit to ring.

C Cell capacitance

What the cell measures, or what the capacitance calculation gave you.

Side B open alone

f Target frequency

kHz

Where you want the circuit to ring.

C Cell capacitance

What the cell measures, or what the capacitance calculation gave you.

Swap sides

What changed

The two sides are the same. Change something on either.

Output	A	B	B against A
L Required inductance	211.1 mH	211.1 mH	same
H Per choke, if two	105.5 mH	105.5 mH	same
Z Characteristic impedance	13.26 kΩ	13.26 kΩ	same

Side A, with its numbers

211.1 mH = \frac{1}{4 π^{2} {(10 kHz)}^{2} \cdot 1.2 nF}

LaTeX

211.1\,\mathrm{mH} = \frac{1}{4\pi^{2} \cdot \left(10\,\mathrm{kHz}\right)^{2} \cdot 1.2\,\mathrm{nF}}

Side B, with its numbers

211.1 mH = \frac{1}{4 π^{2} {(10 kHz)}^{2} \cdot 1.2 nF}

LaTeX

211.1\,\mathrm{mH} = \frac{1}{4\pi^{2} \cdot \left(10\,\mathrm{kHz}\right)^{2} \cdot 1.2\,\mathrm{nF}}