Skip to content
Stan’s Legacy The Stanley Meyer Archive

Figure (5C)

Figure (5C)

How it is written

  • (5C) 7×

Drawings 1

Where it is named · 7

Process and apparatus for the production of fuel gas and the enhanced release of thermal energy from such gas 7×

  1. Figure 5C shows an optical thermal lens assembly for use with either final stage of Figure 5A or Figure 5B.

    Read it there →

  2. … icles are subjected to further energy input, electrical excitation and thermal stimulation, whereby thermal explosive energy results 5, which may be directed thru a Lens assembly of the type shown in Figure 5C to provide a controlled thermal energy output.

    Read it there →

  3. … A nozzle, 10 in Figure 5B, or thermal lens assembly, Figure 5C, provides the directing means in which the destabilized ions are finally thermally ignited.

    Read it there →

  4. … ized gas ions are thermally ignited when said combustible gas ions pass from injector 4 and enter into and pass through a nozzle, 10 in Figure 5B, or an optical thermal lens assembly such as shown in Figure 5C. …

    Read it there →

  5. … In Figure 5C, the combustible gas ions are expelled through and beyond a quenching circuit, 30, and reflected by lenses, 31 and 32, back and forth through a thermal heat zone, 33, prior to atomic breakdown beyond exiting through a final port, 34. …

    Read it there →

  6. In an optical thermal lens assembly or thrust-nozzle, such as shown in Figure 5C, destablized gas ions (electrically and mass unbalanced gas atoms having highly energized nuclei) can be pressurized during spark-ignition. …

    Read it there →

  7. FIGURE 5C

    Read it there →