Skip to content
Stan’s Legacy

breakthrough · Voltage Intensifier Circuit · computed

Breakthrough candidate for VIC: score 0.821 beats previous best

  • Cell — 10mm rod in 12.0mm tube × 50mm, 1 cell(s) parallel → C_eff = 1.33nF, bulk water R = 140290Ω.
  • Water/electrodes (Randles) — 0.1ppm Na+ @ 2°C, surface ×0.25 → λ_D 227nm, C_dl 0.7µF, cell series R 10.7Ω, displacement current 99.1%, breakdown margin ×57.
  • Fig-8 voltammetry (4,798,661) — τ_EDL 101883.5µs (9955.1 carrier cycles to charge), Faradaic leakage at peak 25.3mA (leak score 0.80 — keep amp leakage inhibited while voltage climbs the ladder).
  • Vapor-film discharge (CGDE onset, 1179V across 0.1mm film) — regime townsend-avalanche, film Paschen 719V, 470 Td.
  • Per-molecule (series micro-capacitor chain) — 3.70M molecules across 1.00mm → 318.44 µV/molecule (polarization (µV band)).
  • Chokes — 2 × 0.001H (200 turns, AWG 18, 24m wire, AC R 0.9Ω each).
  • At resonance f_r = 97.71kHz — Xl = 1228Ω, Xc = 1228Ω, tank Q = 98.3, coil Q = 703.4.
  • Cell voltage 1179V from 12V drive (×98.3). Tank current 0.96A circulating (CW upper bound — rate wire/switch for this); average input 19mA at 2% duty.
  • No hard violations (band, wire length, dielectric). Average current is scored, not gated.
  • Score 0.821.

Gate: improved 85% over previous best, tank Q 98.3 ≥ 10, no constraint violations.

Basis

Confidence
0.60
Recorded
Published
30 Aug 2026
Device
Voltage Intensifier Circuit
Source Ref
design session v108
Notebook Id
1632

design-loop eureka-candidate