Skip to content
Stan’s Legacy The Stanley Meyer Archive

breakthrough · Electrical Particle Generator · computed

epg: 0.880 beats 0.655 by >15%

Score 0.880 — η 63.7%, 259.78 W net

  • Variant — EPG #1 — mechanical pump ("Red pump") [modeled]
    EPG Models page 179; WFC Dealership Manual Fig 27; Little Giant B-500, 500 GPH @ 1 ft lift

  • Medium ref — Ferrotec EFH-1 ferrofluid — named in EPG Speculations (page 191); properties from Ferrotec datasheet, NOT from Stan

  • Tube — conductive wall (eddy loss charged)

  • Modulation — from spiral-divider

  • Pathway — bore 120.0mm, loop 200mm, spiral pitch 20mm

  • Coil array — 9 × 979 turns AWG14, 5mm long (3432m wire, 28.45Ω)

  • Medium — slurry, φ=30.21% (3.82× documented), remanence 29%, ρ 2415.2 kg/m³ → M 38.4 kA/m, B 363 G

  • Flow — 0.25 m/s (0.8 fps), Re 3730 transitional, ΔP 5 Pa

  • Modulation — depth 0.900 — coil/pitch 0.25

  • Output — 178.83 V into 50.0Ω at 12.4 Hz (matched load would be 28.45Ω)

Energy budget

electrical gross   407.612 W
− coil I²R         147.836 W
= net to load      259.776 W
hydraulic input    0.139 W
eddy (tube wall)   5.80e-8 W
hydraulic_w        0.139
lenz_w             407.612
mechanical input   407.751 W  (drive terms + Lenz reaction + eddy)
η = 63.71%

Basis

Recorded
Published
21 Sep 2026
Stanbot
v3
Source Ref
design lane epg
Notebook Id
3401

eureka epg epg-faraday-v1