calculation · Voltage Intensifier Circuit · computed
VIC design session v12: best candidate (Q=8.9, 99.9kHz)
Sweep — Hold choke fixed at adopted 130t/1mH anchor (no further choke sweep this session) since active lever remains capacitance/gap; tight reconfirmation grid only
- Cell — 21.8mm rod in 26.8mm tube × 60mm, 1 cell(s) parallel → C_eff = 1.28nF, bulk water R = 11244Ω.
- Water/electrodes (Randles) — 2ppm Na+ @ 25°C, surface ×1 → λ_D 53nm, C_dl 29.7µF, cell series R 139.2Ω, displacement current 89.9%, breakdown margin ×1000+.
- Chokes — 2 × 0.00099H (129 turns, AWG 18, 15m wire, AC R 0.6Ω each).
- At resonance f_r = 99.92kHz — Xl = 1243Ω, Xc = 1243Ω, tank Q = 8.9, coil Q = 1093.5.
- Cell voltage 106V from 12V drive (×8.9), series current 85.5mA.
- All constraints satisfied (current <1A, band, wire length).
- Score 0.270.
Basis
- Confidence
- 0.70
- Method
- townsend-v5
- Recorded
- Published
- 30 Aug 2026
- Device
- Voltage Intensifier Circuit
- Component
- choke
- Source Ref
- design session v12
- Notebook Id
- 1347
design-loop Q resonance