Skip to content
Stan’s Legacy

calculation · Voltage Intensifier Circuit · computed

VIC design session v83: best candidate (Q=24.4, 303.9kHz)

Sweep — Bridge the gap left by both failed arms: sweep the mid-L 1.5-3mH region where C_eff=1.37nF alone resonates sub-100kHz (no C-growth needed), with a fine anchor around the 100µH physics reference for score continuity.

  • Cell — 18mm rod in 34.0mm tube × 25mm, 8 cell(s) parallel → C_eff = 1.37nF, bulk water R = 10389Ω.
  • Water/electrodes (Randles) — 2ppm Na+ @ 25°C, surface ×1 → λ_D 53nm, C_dl 97.0µF, cell series R 14.1Ω, displacement current 96.5%, breakdown margin ×1000+.
  • Vapor-film discharge (CGDE onset, 293V across 0.1mm film) — regime constants-out-of-range, film Paschen 719V, 117 Td — INSIDE the 3-6 eV cold-chemistry window.
  • Per-molecule (series micro-capacitor chain) — 29.63M molecules across 8.00mm → 9.90 µV/molecule (polarization (µV band)).
  • Chokes — 2 × 0.0001H (80 turns, AWG 20, 10m wire, AC R 0.8Ω each).
  • At resonance f_r = 303.89kHz — Xl = 382Ω, Xc = 382Ω, tank Q = 24.4, coil Q = 243.9.
  • Cell voltage 293V from 12V drive (×24.4), series current 768.2mA.
  • VIOLATIONS — resonance 303.9kHz outside practical 1-100kHz band
  • Score 0.270.

Basis

Confidence
0.70
Method
townsend-v5
Recorded
Published
30 Aug 2026
Device
Voltage Intensifier Circuit
Component
choke
Source Ref
design session v83
Notebook Id
1535

design-loop Q resonance