calculation · Voltage Intensifier Circuit · computed
VIC design session v93: best candidate (Q=1.2, 12.9kHz)
Sweep — At C=1.37nF (1-2 cell), sweep per-choke L 3.7-9mH to land f_r in the untested 32-50kHz band with high-turn AWG18-22 coils, and raise peak_v (low duty) to drive Td toward 80.
- Cell — 8mm rod in 9.0mm tube × 40mm, 8 cell(s) parallel → C_eff = 20.53nF, bulk water R = 1203Ω.
- Water/electrodes (Randles) — 2ppm Na+ @ 25°C, surface ×1 → λ_D 53nm, C_dl 55.8µF, cell series R 509.5Ω, displacement current 53.8%, breakdown margin ×85.
- Vapor-film discharge (CGDE onset, 350V across 0.1mm film) — regime sub-breakdown, film Paschen 719V, 140 Td — INSIDE the 3-6 eV cold-chemistry window.
- Per-molecule (series micro-capacitor chain) — 1.85M molecules across 0.50mm → 189.20 µV/molecule (polarization (µV band)).
- Chokes — 2 × 0.0037H (900 turns, AWG 18, 107m wire, AC R 2.2Ω each).
- At resonance f_r = 12.91kHz — Xl = 600Ω, Xc = 600Ω, tank Q = 1.2, coil Q = 133.5.
- Cell voltage 350V from 300V drive (×1.2). Tank current 0.58A circulating (CW upper bound — rate wire/switch for this); average input 117mA at 20% duty.
- No hard violations (band, wire length, dielectric). Average current is scored, not gated.
- Score 0.311.
Basis
- Confidence
- 0.70
- Method
- townsend-v5
- Recorded
- Published
- 30 Aug 2026
- Device
- Voltage Intensifier Circuit
- Component
- choke
- Source Ref
- design session v93
- Notebook Id
- 1559
design-loop Q resonance