Skip to content
Stan’s Legacy

calculation · Water Fuel Cell · computed

WFC design session v47: best candidate (Q=24.4, 94.6kHz)

Sweep — Deliberately detune Q (larger rod OD + wider annular gap → lower magnification) crossed with gamma_se and low peak_v/low-duty drive to slide V_cell into the 80-250 Td sub-critical CGDE corner (M 0.1-1) instead of overshooting into avalanche, keeping Faradaic leakage quenched with cold/pure water.

  • Cell — 24mm rod in 28.0mm tube × 50mm, 1 cell(s) parallel → C_eff = 1.41nF, bulk water R = 30097Ω.
  • Water/electrodes (Randles) — 0.5ppm Na+ @ 25°C, surface ×0.5 → λ_D 106nm, C_dl 6.7µF, cell series R 47.0Ω, displacement current 96.2%, breakdown margin ×128.
  • Fig-8 voltammetry (4,798,661) — τ_EDL 200324.4µs (18953.2 carrier cycles to charge), Faradaic leakage at peak 99.0mA (leak score 0.50 — keep amp leakage inhibited while voltage climbs the ladder).
  • Vapor-film discharge (CGDE onset, 975V across 0.1mm film) — regime townsend-avalanche, film Paschen 778V, 389 Td — OUTSIDE the 80-250 Td cold window.
  • Townsend α/γ — γ = 0.003 (electrode lever), criterion M = γ(e^{αd}−1) = 90.187 → self-sustaining (M≥1) — γ feedback closed, heading for thermalization.
  • Per-molecule (series micro-capacitor chain) — 7.41M molecules across 2.00mm → 131.66 µV/molecule (polarization (µV band)).
  • Chokes — 2 × 0.001H (200 turns, AWG 18, 24m wire, AC R 0.9Ω each).
  • At resonance f_r = 94.61kHz — Xl = 1189Ω, Xc = 1189Ω, tank Q = 24.4, coil Q = 690.5.
  • Cell voltage 975V from 40V drive (×24.4). Tank current 0.82A circulating (CW upper bound — rate wire/switch for this); average input 16mA at 2% duty.
  • No hard violations (band, wire length, dielectric). Average current is scored, not gated.
  • Score 0.614.

Basis

Confidence
0.70
Method
townsend-v5
Recorded
Published
30 Aug 2026
Device
Water Fuel Cell
Component
cell
Source Ref
design session v47
Notebook Id
1637

design-loop Q resonance