Unknown

3D STL Files chapter

• document Resonant Cavity - 3D STLs 2022 · held in full

  Author does not accept and liabilities/responsibilities for those individuals who chose to build the below cell. This information on this site is for educational purposes only.&nbs...

• document Variable Pulse Frequency Generator (K2) Component Interface Plate 2022 · held in full

  Plate for mounting 4 rotary switches (3/8" diameter threads), 1 precision 10-turn potentiometer (3/8" diameter threads), and 1 5mm LED.  Variable Pulse Freq Gen Component fron...

• document VIC 5 coil 2022 · held in full

    meyer_bobbin_ends.stl

• document Coil Winder For VIC5 2022 · held in full

  End cap for holding VIC5 bobbin. Bottom has hexagonal recess for 5/16" nylon lock nut. Best method is to lay flat, line up nut flat edges and lightly tap with hammer flush into rec...

• document Hydrogen Gas Gun - 3D STLs 2023 · held in full

  As of 5-2-23, the below STLs are currently being printed and tested. It is recommended until verification of the parts is completed, that the content herein should be for informati...

• document Gas Processor - 3D STLs 2023 · held in full

  As of 5-18-23, STLs are being printed to test assembly. At this time, until this banner is removed, please do not attempt printing. Verification is needed before others waste time...

• document Photon Injected Resonant Cavity - 3D STLs 2023 · held in full

  Stan had a "triple stack" which was composed of three individual resonant cavities stacked on top one another. These were large and made of machined Delrin. At the top of each was...

• document Steam Resonator - 3D STLs 2023 · held in full

  As of 5-3-23 the STLs shown in here are being printed to build a plastic model. At this point, please only consider the following as informational and do not print until all parts...

• document Stan Meyer Machining Template STLs_5-22-2024 2024 · held in full

  Please be aware that new templates will be added when DIY machining techniques are tested. Check regularly until this banner is removed - indicating the below listed have been fina...