(42)
Opening
Also written port · control plate · plate
Where it is first named
Hydrogen gas passes through valve 43, enters chamber 43, and then goes through port 42 into chamber 47. The amount of gas flowing from chamber 43 to chamber 47 is regulated by controlling the opening of port 42.
How it is written
- (opening 42) 2×
- (port 42) 2×
- (control plate 42) 1×
- (plate 42) 1×
Drawings 3
-
Carries this number · ydrogen Gas Injection Apparatus for Internal Combustion Engine
-
Carries this number · ydrogen Gas Injection Apparatus for Internal Combustion Engine
-
Carries this number · ydrogen Gas Injection Apparatus for Internal Combustion Engine
Where it is named · 6
ydrogen Gas Injection Apparatus for Internal Combustion Engine 6×
-
port (port 42)
Hydrogen gas passes through valve 43, enters chamber 43, and then goes through port 42 into chamber 47. The amount of gas flowing from chamber 43 to chamber 47 is regulated by controlling the opening of port 42.
-
port (port 42)
Hydrogen gas passes through valve 43, enters chamber 43, and then goes through port 42 into chamber 47. The amount of gas flowing from chamber 43 to chamber 47 is regulated by controlling the opening of port 42.
-
opening (opening 42)
Spring 49 holds rod 71 and pin 73 in place relative to the opening 42. When the mechanism 83 operates, pin 73 is pulled away from the opening 42, allowing more gas to flow from chamber 43 into chamber 47.
-
opening (opening 42)
Stoppers 67 and 69 hold spring 49 in the default position. The fixed position of pin 73 relative to the opening 42 is connected to nut 13 attached to rod 61, which is fixed by stoppers 67 and 69. This mechanism controls the idle speed and regulates combustion under low-load operation by adjusting the size of the wedge.
-
control plate (control plate 42)
… The position of control plate 42 relative to port 12 is controlled by the control device connected to lever 19. If an abnormal combustion condition occurs in chamber 20, safety valve 24 is activated.
