Skip to content
Stan’s Legacy

Figure (8B)

Figure (8B)

How it is written

  • (8B)

Drawings 1

Where it is named · 6

Process & Apparatus For The Production Of Fuel Gas & The Enhanced Release Of Thermal Energy From Such Gas

  1. … 7, by means of an interconnected synchronization circuit, such as shown in FIG. 8B. A nozzle, 10 in FIG. 5B, or thermal lens assembly, FIG. 5C, provides the directing means in which the destabilized ions are finally thermally ignited.

    Read it there →

  2. … The extracted electrons are consumed and prevented from re-entering the chamber by a circuit such as shown in FIG. 8B. The elongated gas ions are subjected to a thermal heat zone to cause gas ignition, releasing ther-

    Read it there →

  3. … At the same time the interconnected electron extractor circuit, FIG. 8B, prevents the reintroduction of electrons back into the system. …

    Read it there →

  4. … In the circuit of FIG. 8B, the coordination of synchronization of the circuit with the circuit.of FIG. …

    Read it there →

  5. … 7 may be achieved by interconnecting point “A” of the gate circuit of FIG. 8B to coordinate point “A” of the pulsing circuit of FIG. 7.

    Read it there →

  6. … The electron extractor grid is attached to an electrical circuit (such as shown in FIG. 8B) that allows electrons to flow to an electrical load, 55, when a positive electrical potential is placed on the opposite side of said electrical load. …

    Read it there →