Multi-Cavity Embodiment

MultiStage Solar Storage System 7×

1. unitary structure multi-stage embodiment (unitary structure multi-stage embodiment 50)

   … s it strikes the lightconverting surface of an high-energy conversion/storage cavity 20 and an low-energy conversion/storage cavity 30 combined together as an unitary structure multi-stage embodiment 50. …

   Read it there →

   

2. multistage embodiment (multistage embodiment 50)

   … To prevent heat loss due to ground exposure, the multistage embodiment 50 is encased with an thermalinsulated air/liquid tight enclosure 40; to prevent heat loss due to climatical exposure, an thermal-insulated air/liquid tight capping-lens is positioned on top of multi-stage embodiment 50 and thermal-sealed against enclosure 40. …

   Read it there →

   

3. multi-stage embodiment (multi-stage embodiment 50)

   … To prevent heat loss due to ground exposure, the multistage embodiment 50 is encased with an thermalinsulated air/liquid tight enclosure 40; to prevent heat loss due to climatical exposure, an thermal-insulated air/liquid tight capping-lens is positioned on top of multi-stage embodiment 50 and thermal-sealed against enclosure 40. …

   Read it there →

   

4. basic unitary structure (basic unitary structure 50)

   … The basic unitary structure 50 of FIG. 4 is a composite assembly of an high-energy conversion/storage section 20 of FIG. 3 stacked on top of low-energy conversion/storage section 30 of FIG. 1 with appropriate so-

   Read it there → · on Figure (4)

   

5. multi-cavity embodiment (multi-cavity embodiment 50)

   … For added protection against heat loss, the entire outer surface area of multi-cavity embodiment 50 of FIG. 4 is coated with an thermalinsulated material 39 of FIG. 4 and 42 of FIG. 6 before thermal-insulated stand-off spacers 43a xxx 43n are used as shown in 60 of FIG. 6.

   Read it there → · on Figure (4)

   

6. multi-cavity embodiment (multi-cavity embodiment 50)

   To insure further heat retention, an heat insulation barrier 10 of FIG. 7 can be inserted into enclosure 40 of FIG. 5 and placed on top of multi-cavity embodiment 50 of FIG. …

   Read it there → · on Figure (4)

   

7. multi-stage cavity (multi-stage cavity 50)

   … 1; multi-stage cavity 50 of FIG. 4 is thermally isolated from housing 40 of FIG. 5 and thermal-sealed by thermal-barrier 10 of FIG. 7.

   Read it there → · on Figure (4)