(44)
Disc
Where it is first named
… The winding ring 30 is supported by 'support 31 to the underside of rotating disc 44.
How it is written
- (disc 44) 8×
Drawings 3
-
Page 2 · Electrical Pulse Generator
-
Page 9 · Electrical Pulse Generator
-
Page 10 · Electrical Pulse Generator
Where it is named · 8
Electrical Pulse Generator 8×
-
disc (disc 44)
… The winding ring 30 is supported by 'support 31 to the underside of rotating disc 44.
-
disc (disc 44)
Upon energizing the electromagnets, via terminal 50, in the gap between electromagnets 13a xxx m and 15a xxx 7 there will be a magnetic field 20. Considering now that disc 44 is rotating there will be a relative motion between the first and second series of magnets with the winding ring 30 and in consequence the winding ring 30 is traversing the series of magnetic fields 20a xxx n. …
-
disc (disc 44)
… The intermediate position of the shaft is secured bia set washer 29 and plate washer 23 to the rotating disc 44. The upper end of shaft 24 extends through the stationary upper disc 41 with the assistance of bearings 28.
-
disc (disc 44)
The lower stationary disc 10 and the rotating disc 44 are operable as stated, and with a single magnetic field- /coil winding arrangement there will be a step-up in voltage at the output of terminal 42. Also with the rotating disc 44, the output voltage terminals 42 would necessarily include slip-rings, rotating wires, or the like.
-
disc (disc 44)
On the upper side of the rotating disc 44 there is fixed thereon a third 17a xxx n and fourth 19a xxx n are positioned on the rotating disc 44. Hence the output of the Stationary ring-winding 30 may be readily connected by simple wire 31 as the input to the stationary third 17a xxx m and fourth 19a xxx n series of electromagnets.
-
disc (disc 44)
On the upper side of the rotating disc 44 there is fixed thereon a third 17a xxx n and fourth 19a xxx n are positioned on the rotating disc 44. Hence the output of the Stationary ring-winding 30 may be readily connected by simple wire 31 as the input to the stationary third 17a xxx m and fourth 19a xxx n series of electromagnets.
-
disc (disc 44)
It must be appreciated that the ring-winding 30 and the third and fourth series of electromagnets 17a xxx n and 19a xxx n are positioned on the rotating disc 44. Hence the output of the stationary ring-winding 30 may be readily connected by simple wire 31 as the input to the stationary third 17a xxx n and fourth 19¢@ xxx n series of electromagnets.
