Skip to content
Stan’s Legacy

Figure (2B)

Figure (2B)

How it is written

  • (2B)

Drawings 1

On this figure 2

Where it is named · 8

Controlled Process For The Production Of Thermal Energy From Gases And Apparatus Useful Therefore

  1. FIG. 2B shows an alternative final stage injection system useful in the apparatus of FIG. 1.

    Read it there →

  2. FIG. 2C shows an optical thermal lens assembly for use either final stage of FIG. 2A or FIG. 2B.

    Read it there →

  3. FIGS. 5A and 5B, respectively, show (A) an electron extractor grid used in the injector assemblies of FIG. 2A and FIG. 2B, and (B) the electronic control circuit for the extractor grid.

    Read it there →

  4. … A nozzle, 10 in FIG. 2B, or thermal lens assembly, FIG. 2C, provides the directing means in which the destabilized ions are finally thermally ignited.

    Read it there →

  5. … In the device of FIG. 2B, photon energy 20 is injected into a separate absorption chamber 21. …

    Read it there →

  6. … A single laser coupled by means of fiber optic light guides is an alternative to the plurality of lasers shown in FIG. 2B. Continued exposure of the gas ions to different forms of wave energy during voltage stimulation maintains individual atoms in a destabilized state and prevents atomic stabilization.

    Read it there →

  7. The highly energized gas ions are thermally ignited when said combustible gas ions pass from injector 4 and enter into and pass. through a nozzle, 10 in FIG. 2B, or an optical thermal lens assembly such as shown in FIG. …

    Read it there →

  8. … 2A or FIG. 2B, and restricts electron replacement. …

    Read it there →