Skip to content
Stan’s Legacy

Figure (5B)

Figure (5B)

How it is written

  • (5B)

Drawings 1

Where it is named · 6

Controlled Process For The Production Of Thermal Energy From Gases And Apparatus Useful Therefore

  1. … 4, by means of an interconnected synchronization circuit, such as shown in FIG. 5B. A nozzle, 10 in FIG. 2B, or thermal lens assembly, FIG. 2C, provides the directing means in which the destabilized ions are finally thermally ignited.

    Read it there →

  2. … The extracted electrons are consumed and prevented from re-entering the chamber by a circut such as shown in FIG. 5B. …

    Read it there →

  3. … At the same time the interconnected eletron extractor circuit, FIG. 5B, prevents the reintroduction of electrons back into the system. …

    Read it there →

  4. … It is necessary in the final electron extraction that the frequency with which electrons are removed from the system by sequenced and synchronized with the pulsing of the gas resonant cavity In the circuit of FIG. 5B, the coordination or synchronization of the

    Read it there →

  5. circuit with the circuit of FIG. 4 may be achieved by interconnecting point “A” of the gate circuit of FIG. 5B to coordinate point “A” of the pulsing circuit of

    Read it there →

  6. … The electron extractor grid is attached to an electrical circuit (such as shown in FIG. 5B) that allows electrons to flow to an electrical load, 55, when a positive electrical potential is placed on the opposite side of said electrical load. …

    Read it there →