Skip to content
Stan’s Legacy

Figure (2C)

Figure (2C)

How it is written

  • (2C)

Drawings 2

Where it is named · 6

Controlled Process For The Production Of Thermal Energy From Gases And Apparatus Useful Therefore

  1. FIG. 2C shows an optical thermal lens assembly for use either final stage of FIG. 2A or FIG. 2B.

    Read it there →

  2. … 2A or 2B, receives energized atomic and gas particles where the particles are subjected to further energy input, electrical excitation and thermal stimulation, whereby thermal explosive energy results 5, which may be directed thru a lens assembly of the type shown in FIG. 2C to provide a controlled thermal energy output.

    Read it there →

  3. … 2B, or thermal lens assembly, FIG. 2C, provides the directing means in which the destabilized ions are finally thermally ignited.

    Read it there →

  4. … 2B, or an optical thermal lens assembly such as shown in FIG. 2C. …

    Read it there →

  5. … In FIG. 2C, the combustible gas ions are expelled through and beyond a quenching circuit, 30, and reflected by lenses, 31 and 32, back and forth through a thermal heat zone, 33, prior to atomic breakdown beyond exiting through a final port, 34. …

    Read it there →

  6. In an optical thermal lens assembly or thrust-nozzle, such as shown in FIG. 2C, destablized gas ions (electrically and mass unbalanced gas atoms having highly energized nuclei) can be pressurized during spark-ignition. …

    Read it there →