Skip to content
Stan’s Legacy

(42)

Primary Winding

Also written primary wind- ing · primary

Where it is first named

In operation of the circuit of FIG. 5, a low voltage, such as from a battery, is applied to the primary wind- ing to the circuit of a rotating field. The primary wind- ing 42 being the rotating field has it opposite end connected to ground. As the field of the primary winding 42 rotates, there is induced three pulses at the output of each of the three secondary windings 46a 468, and 46c.
Gas Generator Voltage Control Circuit

How it is written

  • (primary winding 42)
  • (primary 42)
  • (primary wind- ing 42)

Drawings 1

Where it is named · 4

Gas Generator Voltage Control Circuit

  1. primary wind- ing (primary wind- ing 42)

    In operation of the circuit of FIG. 5, a low voltage, such as from a battery, is applied to the primary wind- ing to the circuit of a rotating field. The primary wind- ing 42 being the rotating field has it opposite end connected to ground. As the field of the primary winding 42 rotates, there is induced three pulses at the output of each of the three secondary windings 46a 468, and 46c.

    Read it there → · on Figure (5)

  2. primary winding (primary winding 42)

    In operation of the circuit of FIG. 5, a low voltage, such as from a battery, is applied to the primary wind- ing to the circuit of a rotating field. The primary wind- ing 42 being the rotating field has it opposite end connected to ground. As the field of the primary winding 42 rotates, there is induced three pulses at the output of each of the three secondary windings 46a 468, and 46c.

    Read it there →

  3. primary winding (primary winding 42)

    Again similar to FIG. 1, there is provided a timed pulsing circuit comprised of a timer 17, switch 19, and transistor 18. Initially, the d.c. pulse voltage is switched on and off, to provide a constant share time duty cycle to the primary winding 42 of the rotating field. In the off period there will be no voltage on the primary winding 42, and hence, no voltage output on the secondary winding 46.

    Read it there →

  4. primary (primary 42)

    The circuit of FIG. 5 is especially economical in that extremely low amplitude voltages (0-5 volts) is applied to the primary 42. …

    Read it there → · on Figure (5)