(47)
Trap Area
Also written area · gas trap area
Where it is first named
… The hydrogen gas 4 is fed via line 5 through nozzle 11 in a spray into the trap area 47 of the mixing chamber 20. Nozzle 11 has an opening smaller than the
How it is written
- (trap area 47) 3×
- (area 47) 2×
- (gas trap area 47) 1×
Drawings 1
-
Carries this number · Hydrogen Gas Injection for Internal Combustion Engine
Where it is named · 6
Hydrogen Gas Injection for Internal Combustion Engine 6×
-
trap area (trap area 47)
… The hydrogen gas 4 is fed via line 5 through nozzle 11 in a spray into the trap area 47 of the mixing chamber 20. Nozzle 11 has an opening smaller than the
-
gas trap area (gas trap area 47)
With continued reference to Figure 2 the gas trap area 47 is a predetermined size. In that hydrogen is lighter than air, the hydrogen will rise and become entrapped in the area 47. The size of area 47 is sufficient to contain enough hydrogen gas for instant ignition upon start up of the combustion engine.
-
area (area 47)
With continued reference to Figure 2 the gas trap area 47 is a predetermined size. In that hydrogen is lighter than air, the hydrogen will rise and become entrapped in the area 47. The size of area 47 is sufficient to contain enough hydrogen gas for instant ignition upon start up of the combustion engine.
-
area (area 47)
With continued reference to Figure 2 the gas trap area 47 is a predetermined size. In that hydrogen is lighter than air, the hydrogen will rise and become entrapped in the area 47. The size of area 47 is sufficient to contain enough hydrogen gas for instant ignition upon start up of the combustion engine.
-
trap area (trap area 47)
It will be noted that the hydrogen gas is injected in the uppermost region of the trap area 47. …
-
trap area (trap area 47)
… Therefore, if the hydrogen gas entered the trap area 47 (mixing areas) at its lowermost region the hydrogen gas would rise so rapidly that the air could not mix with the oxygen. …
